add latest 3d models
4 files changed, 2 insertions(+), 2 deletions(-)

A => cad/OPTOCASE-BodyEnd1 v47.f3d
A => cad/OPTOCASE-BodyEnd1 v47.stl
R cad/OPTOCASE.FCStd => 
M doc/BOM_and_assembly.md
A => cad/OPTOCASE-BodyEnd1 v47.f3d +0 -0

        
A => cad/OPTOCASE-BodyEnd1 v47.stl +0 -0

        
R cad/OPTOCASE.FCStd =>  +0 -0

        
M doc/BOM_and_assembly.md +2 -2
@@ 6,7 6,7 @@ 1.3" SPI OLED display (Polulu) https://w
 5v 600ma switching buck converter (Polulu) https://www.pololu.com/product/3792
 15v 500ma power adapter (Amazon) https://www.amazon.com/gp/product/B07G2W4B6F/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
 RS422 to TTL converter (Amazon) https://www.amazon.com/gp/product/B078N1CFJF/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
-1m cable for OptoNCDT (Harting) HARTING 21348500C79010
+1m cable for OptoNCDT (Harting) HARTING 21348500C79010 https://octopart.com/search?q=21348500C79010&currency=USD&specs=0
 Barrel Jack pigtail (Amazon) https://www.amazon.com/gp/product/B08272H1SR/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
 
 SPST Switch (part # tbd)

          
@@ 21,7 21,7 @@ Dupont wires (M/M and M/F)
 Hot Glue
 Solder 
 
-Notes: 
+__Notes:__
 
 	1. The STM32 development board must be initially programmed using an ST-Link programmer. For non-development purposes, It's easiest to have someone with an ST-link install a USB boot loader that permits subsequent firmware loads to be performed by directly connecting the board to a computer via its micro-usb port. 
 	2. The STM "blue pill" board is not designed to be powered by USB and external (power adapter) simultaneously. When putting this system together, it's recommended that the +5v trace from the USB connector be severed (typically using an xacto knife, see coming photos for details). When this is done, the board can no longer be powered directly from USB. Power is supplied via the power adapter regardless of whether the device is connected via USB.